Description of Model

HD	***	G03	LW
Directional Control Valve	Spool type	Nominal Valve Size	Wiring Connection Type
High Flow Directional Control Solenoid Valve	See “List of Spool Function” in Technical Support	G03 3/8”	Box type
		D05
		NG10
		CETOP5

 

B/E		AC/DC/RF
Series No.		Coil Voltage (V)
B	E	AC110	AC220	RF110	RF220
High Efficiency and Low Current Directional Control Solenoid Valve	Standard High Flow Wet Pin Design Valve	Coil Frequency (HZ)
		50/60

Notes:

1.    Please refer to “Features of Coil” for the electromagnetic coil.

2.    When selecting the tapered plug applied into valve port to reduce flow rate, please indicate the hole size (mm) of the tapered plug.

3.    When selecting A/B/AB adjustment type, please refer to the table of “Statement of Model No. of Proportional Adjustment & Manual Switch Installed Solenoid Valve”.

4.    B-type valve can reduce current effectively, even energy-saving.

5.    B-type valve can reach the high flow and pressure as the same as E-type.

6.    The B/E solenoid valves conform to the international standard and totally interchangeable.

 

Features of Coil

Model Specification		HD-G03
		AC				DC	RF
Voltage (V)		110		220		110	220
		50	60	50	60
Holding Current (A)	B type	0.62	0.69	0.27	0.33	0.54	0.27
	E type	0.72	0.83	0.32	0.41
Inrush Current (A)	B type	3.41	4.14	1.58	1.95
	E type	4.12	4.55	1.75	2.51
Protection Class		IP65
Coil insulation Class		PEWH class
Maximum Tolerable Temperature		180°C

Notes：

1. All the coils can be operated within ±10% the rated voltage.

2.  Special voltage requirements are also available.

 

Temperature Rise Performance for B Type vs. E Type

1.    The operation pressure is 100kgf/em² in the coil temperature test.

2.    The test is at a constant temperature of 25°C.

3.    Using AC220V coil for this test.

 

The Features of B and E Solenoid Valve

1.    Dual line tank design reduces the pressure drop resulting in better flow characteristics.

2.    The installation of anti-shock gasket enables the main body to withstand higher pressure and the main body won’t deformation easily.

3.    New type of magnetic coil and tube combination, enable the solenoid valve to lower the temperature effectively during operation.

4.    New special design type coil can lower current effectively, even energy-saving, also able to reach the high flow and pressure as the same as E type. Please refer to “Pressure drop curve” for a reference.

5.    The valve’s feature and dimensions are as the same as E-type.

6.    The B-type solenoid valve will improve your product quality and increase the company’s competitiveness.

 

Pressure Drop Curve (measured at v = 38mm²/s and temp. = 50°C)

Model No.	Pressure Drop Curve Number					Max Allowable Back Pressure
	P→A	B→T	P→B	A→T	P→T	kgf/cm²
HD-2B2-G03	(8)	(9)	(3)	(3)	-	100
HD-2B3-G03	(7)	(8)	(1)	(1)	-	100
HD-2B8-G03	(4)	-	(5)	-	-	80
HD-3C2-G03	(3)	(3)	(3)	(3)	-	130
HD-3C3-G03	(1)	(1)	(1)	(1)	(3)	150
HD-3C4-G03	(3)	(2)	(3)	(2)	-	100
HD-3C40-G03	(3)	(3)	(3)	(3)	-	90
HD-3C60-G03	(4)	(5)	(4)	(5)	(9)	100
HD-3C9-G03	(1)	(3)	(1)	(3)	-	100
HD-3C10-G03	(3)	(2)	(3)	(3)	-	110
HD-3C11-G03	(1)	(3)	(3)	(3)	-	110
HD-3C12-G03	(3)	(3)	(3)	(2)	-	110
HD-2D2-G03	(6)	(7)	(4)	(4)	-	120

 

Feature Statement

Model	HD-G03
Performance	Max Pressure (kgf/cm²)	Allowable Back-Pressure (kgf/cm²)	Max Flow (L/min)	Conversion Frequency (Cycle/min)	Hydraulic Oil Temperature Range (°C)	Hydraulic Oil Viscosity Range (cst)
	315	70~160	100	AC、DC: 240	-15~+70	10~400 (ISO VG46,68)
				RF-N-S: 120

 

Notes：

1.    Non-spring type valve should be installed horizontally.

2.    Installation surface and valve surface should be keeping under 3.2z surface roughness.

3.    Please do not change the parts of solenoid valve by yourself.

Accessories:

1.    G03: Screw of main body M6 x 35L…..4pcs

2.    Main body with sub plate.

 

View & Component

	03LW-AC-One-way：Weight 3.6㎏
	03LW-AC-Two-way：Weight 4.4㎏